Estimation of electron temperature in atmospheric pressure dielectric barrier discharge using line intensity ratio method

Authors

  • R Shrestha Department of Natural Science, Kathmandu University, Dhulikhel, and the Department of physics, Napal Banepa Polytechnic College, Kavre,
  • RB Tyata Department of Electrical, Khwopa College of Engineering, Libali-2, Bhaktapur
  • DP Subedi Department of Natural Science, Kathmandu University, Dhulikhel,

DOI:

https://doi.org/10.3126/kuset.v8i2.7323

Abstract

Dielectric Barrier Discharge was produced by applying high voltage AC source of frequency (10-30 KHz) and potential difference of (0-20) kV across two parallel plate electrodes with glass as dielectric barrier. Optical emission spectroscopy was used for the characterization of the discharge produced at atmospheric pressure. The emission spectra in the range of 200 nm to 850 nm have been analyzed to estimate the electron temperature by line intensity ratio method. The results showed that the electron temperature is about 0.9 eV.

Kathmandu University Journal of Science, Engineering and Technology Vol. 8, No. II, December, 2012, 37-42

DOI: http://dx.doi.org/10.3126/kuset.v8i2.7323

Downloads

Download data is not yet available.
Abstract
763
PDF
2318

Downloads

Published

2013-01-03

How to Cite

Shrestha, R., Tyata, R., & Subedi, D. (2013). Estimation of electron temperature in atmospheric pressure dielectric barrier discharge using line intensity ratio method. Kathmandu University Journal of Science, Engineering and Technology, 8(2), 37–42. https://doi.org/10.3126/kuset.v8i2.7323

Issue

Section

Original Research Articles