Preparation of halide sensors by means of co-precipitation of silver sulphide and silver halide

Authors

  • Armila Rajbhandari Central Department of Chemistry, Tribhuvan University, Kirtipur, Kathmandu
  • Krishna Manandhar Central Department of Chemistry, Tribhuvan University, Kirtipur, Kathmandu
  • Raja Ram Pradhananga Central Department of Chemistry, Tribhuvan University, Kirtipur, Kathmandu

DOI:

https://doi.org/10.3126/jncs.v30i0.9390

Keywords:

Halide sensors, Nernstian response, Selectivity coefficient, Potentiometric titrations

Abstract

Halide sensors have been prepared in the laboratory by means of co-precipitation of silver sulphide and silver halide and is used for the determination of iodide, bromide and chlorides ions. The iodide sensors show a Nernstian response in the concentration range of 10-1 to 10-6M iodide ions, bromide sensors show a linear response in the concentration range of 10-1 to 10-5M bromide ions while chloride sensors show linear response upto the concentration range of 10-4M chloride ions. The response time of all the electrodes, is < 1minute. The iodide sensors were found to be selective towards iodide ions in the presence of Cl- and Br- ions while bromide and chloride sensors interferred by iodide ions as indicated by selectivity coefficient values of 3.98 and 48.9 respectively. These sensors have been successfully applied for potentiometric titrations.

DOI: http://dx.doi.org/10.3126/jncs.v30i0.9390

Journal of Nepal Chemical Society

Vol. 30, 2012

Page:  168-173

Uploaded date: 12/20/2013

 

 

Downloads

Download data is not yet available.
Abstract
2478
PDF
1523

Downloads

Published

2013-12-19

How to Cite

Rajbhandari, A., Manandhar, K., & Pradhananga, R. R. (2013). Preparation of halide sensors by means of co-precipitation of silver sulphide and silver halide. Journal of Nepal Chemical Society, 30, 168–173. https://doi.org/10.3126/jncs.v30i0.9390

Issue

Section

Articles