Effect of Adhesion Booster on Fluoride-releasing Composite: An in vitro Study

Authors

  • Varunjeet Chaudhary RKDF Dental College, Bhopal
  • Sanad Singh Solanki RKDF Dental College, Bhopal
  • Varsha Yadav RKDF Dental College, Bhopal
  • Seema Lahoti RKDF Dental College, Bhopal

DOI:

https://doi.org/10.3126/ojn.v7i2.20161

Keywords:

brackets, composite resin, shear bond strength

Abstract

Objective: To evaluate the shear bond strength of stainless steel brackets bonded with fluoride-releasing composite resins, comparing effect of adhesion booster and conventional primer.

Materials & Method: Sixty extracted premolars were subjected to bracket bonding with fluoride-releasing composite resin; which were bonded by randomly divided into two groups of bonding agents: Group 1- conventional primer as control group, Group 2- adhesion booster. After bonding, the samples were thermocycled (500 cycles) at 5ºC and 55ºC temperatures. After 48 hours they were subjected to shear bond strength testing in occluso-gingival direction, using an MTS 810 Universal Testing Machine with load speed of 0.5 mm/min.

Result: Mean shear bond strength was significantly more in samples bonded with adhesion booster (14.792±3.805 Mpa) as compared to conventional primers (11.327±4.047 Mpa). There was statistically significant difference in shear bond strength between the groups (p=0.001).

Conclusion: The use of the adhesion booster significantly increased the bond strength of bracket bonded with fluoride-releasing composite.

Downloads

Download data is not yet available.
Abstract
453
PDF
729

Author Biographies

Varunjeet Chaudhary, RKDF Dental College, Bhopal

Department of Orthodontics, Senior Lecturer

Sanad Singh Solanki, RKDF Dental College, Bhopal

Department of Orthodontics, P.G. Resident

Varsha Yadav, RKDF Dental College, Bhopal

Department of Orthodontics, Lecturer

Seema Lahoti, RKDF Dental College, Bhopal

Department of Orthodontics, Reader

Downloads

Published

2017-12-31

How to Cite

Chaudhary, V., Solanki, S. S., Yadav, V., & Lahoti, S. (2017). Effect of Adhesion Booster on Fluoride-releasing Composite: An in vitro Study. Orthodontic Journal of Nepal, 7(2), 28–31. https://doi.org/10.3126/ojn.v7i2.20161

Issue

Vol. 7 No. 2 (2017)

Section

Original Articles

License

Copyright © held by Orthodontic & Dentofacial Orthopedic Association of Nepal

  • Copyright on any research article is transferred in full to the Orthodontic & Dentofacial Orthopedic Association of Nepal upon publication in the journal.  The copyright transfer includes the right to reproduce and distribute the article in any form of reproduction (printing, electronic media or any other form).
  • Articles in the Orthodontic Journal of Nepal are Open Access articles published under the Creative Commons CC BY License (https://creativecommons.org/licenses/by/4.0/)
  • This license permits use, distribution and reproduction in any medium, provided the original work is properly cited.